June 13, 2026
10 Best Resin Printer Wash And Cure Station of 2026
Last Updated - June 13, 2026
|
Up to 32% off
1
Our Rankings
ANYCUBIC
Clicked 397 times in the last week
ANYCUBIC Wash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and IPA Saving, for Anycubic Photon Mono M5 Saturn LCD/SLA/DLP 3D Printer
32% Off
View Deal on:
View Deal
Why We Love It
- Higher CompatibilityAnycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Photon Mono M7 Pro, Saturn 3/4 series or other 10.6 inches and below.
- Flexicure Gooseneck LightDue to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
- Better Curing EffectThe Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
- Efficient IPA utilizationThe dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
- Dual-layer CuringA specially designed double-layer curing platform increases the number of models cured per cycle and markedly improves curing efficiency.
2
Our Rankings
ANYCUBIC
ANYCUBIC Wash and Cure 3, Upgraded Volume 2 in 1 Wash and Cure Station, with Gooseneck Lights, for Mars Anycubic Photon Mono 4 2 Resin 3D Printer, Washing Size of 165 x 100 x180 mm
31% Off
View Deal on:
View Deal
Main Highlights
- Larger Size for Upgraded CapacityCompared to Anycubic Wash & Cure 2, Wash and Cure 3 has an impressive 42% increase in cleaning basket capacity, this makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less. The volume of the cleaning bucket has also increased to 4L, meeting the cleaning needs of larger and more 3d models
- Gooseneck light designThe "Innovative Flexicure Gooseneck Light Design" of ANYCUBIC increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments
- Dual-layer Design, IPA SavingThe double-layered PP material cleaning basket is designed to support cleaning with defferent platforms. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design also maximizes the efficiency of IPA usage
- Enhanced Curing PowerBy utilizing a new bead arrangement and lens light source, Wash & Cure 3.0 offers a 20%* improvement in curing uniformity over the previous generation 2.0. This results in a more thorough and comprehensive curing of the entire model
- Quiet and SimpleCleaning and curing dual modes, easily selected with one click; Gooseneck light curing mode can be easily toggled on and off with one click. Adjustable from 1 to 30 minutes at will. After the closed structure design and software optimization, machine can effectively reduce the cleaning, curing noise interference, to create a quieter and more comfortable working environment
3
Our Rankings
ELEGOO
ELEGOO Mercury Plus V3.0 Wash and Cure Station, 7.5 L Large Capacity, Compatible with Mars Saturn Photon Halot MSLA LCD DLP 3D Printers, Washing Size of 9.05"×5.31”×10.24“
25% Off
View Deal on:
View Deal
Main Highlights
- Size-Upgraded for Larger CapacityUpgrade to ELEGOO Mercury Plus V3.0 wash and cure station for increased capacity and maximized efficiency. Designed with a generous 7.5L cleaning capacity, which is 2.1 times greater than V2.0, and a curing size expanded by 5.6 times, the machine ensures effortless handling of larger models or multiple prints in one go.
- Thorough CleaningFeaturing an upgraded POM bearing, Mercury Plus V3.0 ensures smoother rotation and enhanced water agitation at high-speed, resulting in more efficient model cleaning and thorough removal of residual resin.
- Simple Operation, Easy to UseWith an intuitive touch panel, you can easily track the setting and remaining times. Tailor the wash and cure duration (maximum 30 minutes) to your specific needs, ensuring optimal results every time.
- Anti-UV Protection CoverThe anti-UV cover effectively blocks 99.9% of ultraviolet rays, protecting your eyes while ensuring optimal curing. Additionally, the micro switch instantly stops the curing process when the cover is removed, providing seamless operation and enhanced safety.
- Ideal CompatibilityCompatible with most LCD/DLP/SLA 3D printers on the market, providing a simple and efficient post-processing support for your prints.
- Powerful 360° All-Round CuringFeaturing a 360° rotating turntable with 24pcs of 405nm UV lights, the machine ensures rapid and even curing, capturing every intricate detail flawlessly. The increased single LED light beneath the transparent turntable helps achieve an all-round curing from top to bottom without any blind spots, resulting in better-quality prints.
4
Our Rankings
ELEGOO
ELEGOO Mercury Plus 2.0 Wash and Cure Station V2 for Mars Photon S Photon Mono LCD SLA DLP 3D Printer Models
18% Off
View Deal on:
View Deal
Main Highlights
- Upgrade Protection FunctionSealed washing to prevent the volatilization of alcohol during the cleaning process . Fan-less curing mode makes it quieter to use. The anti-UV lid can block 99.95% of ultraviolet rays to protect your eyes.
- Intelligent Curing and WashingThe front TFT screen can directly display the setting time and remaining time, and the operation is simple and intuitive. With built-in 16 pcs of 405nm UV LED and a 360-degree rotating turntable, you can uniformly cure the model.
- Flexible Washing ModeThe models can be placed in a cleaning basket to be cleaned separately, or mount the build plate with models on it and wash them together, which can avoid direct touch with the uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
- Ideal CompatibilityCompatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon s etc, which provides you an ideal support for washing and curing your 3D resin prints.
- Special NotesThe washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
5
Our Rankings
ANYCUBIC
ANYCUBIC Wash and Cure Machine 3.0, 2 in 1 UV Washing and Curing Station for ANYCUBIC Photon Mono 4 2 Mars Series LCD/DLP/SLA 3D Printer Models, with Twistable Gooseneck Light
31% Off
View Deal on:
View Deal
Main Highlights
- Localized Strengthening, Uniform CuringThe "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the local curing effect. By adopting a brand new arrangement of light beads and Lens light source, wash and cure 3s curing uniformity has been enhanced by 20%, bringing in a more thorough and comprehensive curing of the entire model
- Larger Wash&Cure SizeAnycubic Wash & Cure 3s maximum cleaning volume is up to 165*100*180mm, The total volume of the cleaning bucket has been expanded to 4L. The curing size is up to 160*180 mm, to accommodate larger and more models for single post-processing session
- Detergent SavingAnycubic wash and cure 3 machine's double-layer PP material cleaning basket designed with two heights at 3.93'' and 6.5, to flexibly accommodate print platforms from 5.9" to 7.3". The amount of IPA used can be adjusted according to the heights of the model to achieve savings
- Wide CompatibilityEnlarged size enables ANYCUBIC Wash & Cure 3 Station to be compatible with anycubic photon mono 4/2, mars 3 series, mars 4, mars 4 ultra and other consumer-grade resin 3D printers measuring 7.3'' and below available on the market
- Simple Operation, Quiet and EfficientOne click to select cleaning and curing dual mode & switch the Gooseneck light curing mode. Infinite rotary knob control, 1 to 30 minutes adjustment. Besides, The decibel when the machine is running does not exceed 65db and will not disturb normal life and work
See Today's Deals Prices6
Our Rankings
ELEGOO
ELEGOO Mercury X Bundle, Wash and Cure Machine for Large Resin 3D Printed Models, Compatible with Saturn, Mars MSLA 3D Printers
20% Off
View Deal on:
View Deal
Main Highlights
- Essential for resin 3D printing ELEGOO Mercury X Bundle contains 1 washing Machine and 1 post-curing Machine, which completes your resin 3D printing experience for post-processing and allows you to wash and cure 3D prints at the same time, maximizing your throughput.
- Washing larger prints easier With a 7.5Liters container, you can directly wash big parts 3D printed on ELEGOO Saturn and Mars 3 as well. Leave the prints on the build plate and set it on the hanger inside the bucket, then the parts will be washed in the stirring solvent removing all the residual resin.
- Improve your print quality The post-curing Machine comes with 2 light bars with built-in 14 LED lights each and 4 LED lights beneath the turntable. Working with Fresnel lens, they can emit the optimal 405nm wavelength of UV light and increase the quality of the resin 3D prints.
- Intuitive and safe operation ELEGOO Mercury X Bundle adopts a sleek design using a single knob. Press and hold to turn on and off the machine then rotate the knob to set an appropriate time for washing and curing. The UV cover blocks 99.9% of ultraviolet rays and protects your eyesight during post-curing.
- Tips and tricks After a model is washed, it's better to dry it first before you put it in the curing Machine. For parts printed with water-washable resin, it's better to use running water to wash and not suitable to clean them using the washing Machine. Note:It is necessary for washing Machine to put liquid in the bucket in advance, otherwise it will also cause the wheel to get stuck when running.
7
Our Rankings
Creality
Creality Wash and Cure Station UW-01 2 in 1 Machine Resin 3D Printer UV Curing Rotary Box Bucket for LCD/DLP/SLA Washing Size 7.48x6.06x7.87 inches
View Deal on:
View Deal
Main Highlights
- Double-Row UV Lamp Beads & 360° Rotating Platform: With built-in LED beads(18 pieces of UV LED lights), the machine is compatible with most of resin printers; The double-row 9-bead design with a higher irradiated area realizes quick curing and even irradiation for the larger model. 360° curing tray with magnetic force and reflective mirror make full use of the light source, which cures the model all the angle
- LED HD Touch Button: Equipped with touch-sensitive buttons and LED large-size screen, the machine gives you a premium experience. Once the machine cover is removed during the curing process, it will immediately suspend the curing, which avoids light source glare and reduces light pollution
- Wash and Cure: The UW-01 all-in-one washing and curing machine adopts a special control system, which supports one step to finish the model postprocess. The curing size can reach 165x200mm, and the mirror surface treatment of the turntable makes the model better
- Large-Size Washing Container: 190x154x200mm washing container size. It supports larger size models for cleaning; with a sealed container and lid, it avoids cleaning solution volatilization and also stores the cleaning solution for repeated use
- Multiple Functions & Self-adjustable Bracket: Effective and diverse washing modes. Suitable for most resin printing platforms. Flexible in the z-axis, fit the model with the water level
8
Our Rankings
ELEGOO
ELEGOO Upgraded Wash and Cure Station-Mercury Plus 3.0, 2 in 1 Clean and Cure Station, 7.5L Large Capacity Cleaning, 360ｰ All-Around Curing, Compatible with All Resin 3D Printing Models
View Deal on:
View Deal
Main Highlights
- Upgraded VersionELEGOO Mercury Plus V3 wash and cure station is a completely upgraded version of Mercury Plus V2. With a wash station capacity up to 7.5L and a resin curing area of 250mm x 290mm (H), you can wash and cure larger models. Its overall design is more user-friendly, making it an ideal choice for post-processing.
- 360° All-Around UV CuringFeaturing an upgraded UV light module (24pcs of 405nm UV lights), the resin curing machine ensures even light distribution for thorough curing. It is paired with a rotating transparent turntable and a reflective base, which ensures your models come out perfectly hardened from every angle.
- Highly Efficient CleaningThe resin wash station is equipped with a POM bearing, ensuring a smoother turbine rotation and more powerful agitation, leading to faster and more effective washing for your 3D resin models.
- Superior Safety FeaturesThe UV-blocking yellow cover filters out 99.9% of harmful UV light, ensuring a safe work environment. Plus, the built-in safety switch automatically pauses the curing process if the cover is removed, adding an extra layer of protection.
- Durable and Adjustable Cleaning BasketELEGOO Mercury Plus 3.0 wash basket, made from corrosion-resistant PP material, the adjustable design can fit build plate of different sizes of (max 10 Inch). You can wash 3D printed models directly without removing them from the build plate to avoid contact with uncured resin.
9
Our Rankings
ELEGOO
ELEGOO Mercury Plus 3.0 Larger Wash and Cure Station, Resin Curing Machine for LCD/SLA/DLP 3D Printing Models, Best for Saturn, Mars 3D Printer, Washing Size of 230 * 135 * 260mmm
View Deal on:
View Deal
Main Highlights
- Larger Cleaning and Curing SizeELEGOO Mercury Plus 3.0 has a 114% increase in cleaning capacity compared to Mercury Plus 2.0, up to 7.5L, with a maximum cleaning size of 230*135*260mm and a 200% increase in curing size to 250*290mm, which allows it to adapt to larger and more models for post-processing
- 2-in-1 Cleaning and Curing DesignELEGOO Mercury Plus 3.0 supports one-step model post-processing. The powerful vortex of the cleaning station cleans the model of excess resin, then dries and cures the model using the curing station
- 360° All-Round CuringELEGOO Mercury Plus 3.0 wash and curing machine adopts a total of 24 pcs 405 nm led and a unique reflective mirror design, which makes the UV light more evenly projected on the model by 360° rotating turntable and bottom light source. Its maximum curing size is 250mm*290mm(H) compatible with Saturn 4 Ultra
- Two Cleaning Modes1. Cleaning basket: Simply place the disassembled print model into the basket and it can be cleaned directly. 2. Hanging cleaning: By adjusting the bracket, you can hang the printing platform directly on the cleaning rack for cleaning, preventing direct contact with the unhardened resin.
- Wide CompatibilityThe upgraded Mercury Plus 3.0 purge curing machine is compatible with resin 3D printers up to 10 inches in size, such as the ELEGOO Mars /Saturn series
10
Our Rankings
ANYCUBIC
ANYCUBIC Photon Mono 4 and Wash & Cure 3.0, Resin 3D Printer Bundle
28% Off
View Deal on:
View Deal
Main Highlights
- 7'' 10K High ResolutionPhoton Mono 4 boasts an impressive 105% increase in print precision compared to Mono 2. With a resolution of 9024x5120, each pixel measures a mere 17x17m on the X and Y axes. This enhanced capability allows for creating models with exceptional detail and dynamic richness.
- Powerful Light SourceThe time-tested Anycubic LighTurbo matrix light source technology delivers stable, balanced, and uniform lighting to reduce layer lines and rasterization, creating models with ultra-smooth surface and maximum print details.
- Sufficient Print SizeWith a generous maximum build volume of 6.04'' x 3.42'' x 6.49''/153.4mm x 87mm x 165mm, you have ample print space to easily tackle your daily tasks and demanding projects.
- Larger Size for Upgraded CapacityCompared to Anycubic Wash & Cure 2, Wash and Cure 3 has an impressive 42% increase in cleaning basket capacity, this makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less. The volume of the cleaning bucket has also increased to 4L, meeting the cleaning needs of larger and more 3d models
- Gooseneck light designThe "Innovative Flexicure Gooseneck Light Design" of ANYCUBIC increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments